• (+91) 9860253100
  • (+91) 8975750760
Oil And Gas Internals wholesaler India, Oil And Gas Internals Suppliers Maharashtra-India

Oil And Gas Internals

Oil And Gas Internals

Finepac Structures Private Limited is offering exclusive range of Oil And Gas Internals that is manufactured by us in standard and customized sizes as well. Being a trustworthy firm, we are now able to design all its processing systems so that it can meet the standards of various clients from worldwide

We manufacture these internals using high grade materials and consist of different construction because of its own pertinence. These are well suited in oil and gas industries for various functions.

The unmatched quality and low price have attracted millions of buyers from all over the world, owing to which we are reckoned as one of the reputed Oil And Gas Internals Manufacturers, Exporters and Wholesale Oil And Gas Process Internals Suppliers from Pune, Maharashtra, India.

Finepac is a leading supplier of process systems for a wide range of products within the oil and gas industry.

Mist Eliminator 1. Demister Pad (Mesh Pad) :
  • In the most familiar application of knitted mesh, the crimped strips are stacked to form a pad with typical thickness of four or six inches.
  • Rigidity is provided by a frame—usually metal—consisting of a grid on each side and rods passing through the mesh. Pads larger than about three feet across are fabricated in sections narrow enough to pass through a manway for assembly inside a vessel.

Such mesh can efficiently capture mist droplets as small as 5 microns (micrometers)

2. Vane Pack:

Vane Pack are designed to separate entrained liquid from gas stream .The basic design consideration are particle size of the liquid droplets entrained & physical properties of the fluid to estimate pressure drop throughout & efficiency.

  • Vane Pack offer a complete range of efficient vane packs for both horizontal & vertical flow.
  • Size of mist droplets which Finepac separate= 10um or larger (under atmospheric pressure maximum pressure drop 10 bar.)
  • 3. Vane Inlet Device:
    • The vane type inlet device dissipates the momentum of the inlet gas via a change in direction & velocity hence allowing more efficient separation via the main separation internal.
    • Vane type inlet device reduces gas velocities flowing over the liquid surface preventing re-entratainment of previously collected liquid off the liquid surface.
    4. Baffles :

    In liquid-liquid Separation, it is essential to achieve laminar flow through Vessel. Perforated Plates are used to promote this condition. Baffles Plates can have either single or multiple skins(Double Plate)

    To provide the most efficient packing, we design our products around a set of interrelated performance goals.

    Our proprietary software, UNISIM R-380 determines critical design elements, assisting in the selection of the most efficient packings and internals for a specific application.

    Our engineers can provide you with this service:

    • Heat Transfer Efficiency
    • Control of Fouling and Plugging.
    • Mass Transfer Efficiency.
    • Liquid and Gas Distribution.
    • Low Pressure Drop.
    • Ease of Installation and Removal
    • High Throughput Capacity.
    • Economy.

    We are using state-of-the-art simulation packages for Thermal & Hydraulic Design of Process Equipments.

    Parts of Internals for Oil and Gas Industries

    • Bed limiters
    • High-performance distributors
    • Feed devices
    • Support plates
    • Traditional distributor
    • Liquid collector plates
    • Feed devices
    • Liquid collectors
    • Liquid distributors
    • Hold-down grids along-with the Structured Packing
    • Packing supports
    • Other Column Internal Accessories

    Ranges of Oil And Gas Internals

    • Support Grids
    • Trough Distributors
    • Redistributors / Chimney Tray Redistributors
    • Channel Type
    • Liquid Collectors
    • Antenna Type
    • Liquid Distributor
    • Orifice Distributors
    • Vane Type
    • With Pre-Distribution Type

    Application Areas of Oil And Gas Internals

    • Pesticides And Fertilizers
    • Oil And Gas Industries
    • Alcohols
    • Bulk Drugs
    • Agrochemicals
    • Aromatic And Essential Oils
    • Drug And Dye Intermediates
    • Petrochemicals
    • Organic chemicals
    • Drug Intermediates
    • Pharmaceuticals

We are specialized in design and simulation of TEG Contractor for Oil & Gas Industry.

You may also like

Know Us more